Trex composite deck with railing built by Osnova Construction in the Chicago suburbs

Is Trex Composite Decking Really Low Maintenance? What a Trex Deck Still Needs

Trex boards skip the staining and sealing that wood needs every few years. Here is the upkeep they do need, what sits underneath them, and when resurfacing beats a rebuild.

Yes, compared with wood. Trex boards never need staining, sealing or painting, and they are made to resist moisture, fading and splintering. What they still need is cleaning: Trex says warm soapy water and a soft brush handle dirt on its current decking lines. And the frame under the boards is usually still pressure-treated wood, so the structure ages like any deck frame and is worth checking.

That is why composite decking is the most common choice for homeowners who want a good-looking deck without a yearly weekend of maintenance. Osnova Construction builds composite decks in Trex, TimberTech and Fiberon, and three recent Trex projects below show what the finished result looks like.

Elevated Trex composite deck with brown Trex railings and stairs over a paver patio in Bloomingdale
Trex decking and Trex railings on the Bloomingdale deck replacement.

How do you clean a Trex deck?

For Trex Transcend, Enhance and Select, the Trex care and cleaning guide says soap-and-water cleaning or a gentle pressure wash will do: spray off loose debris with a hose, then use warm soapy water and a soft bristle brush to lift dirt out of the board texture. If you use a pressure washer, Trex limits it to 3100 psi with a fan tip. Older Trex lines such as Accents, Origins and Contours are different: Trex recommends a composite deck cleaner twice a year for those.

Spills are worth wiping up promptly, and leaves left in piles can stain the surface as they break down. Neither is a big job, but "low maintenance" means a hose and a brush, not nothing.

What does composite decking save you compared with wood?

A wood deck needs stain or sealer on a schedule to keep water out and the color even, and boards that crack or splinter get replaced one at a time. Composite boards skip all of that. They are made for outdoor conditions and give a durable surface for gatherings, grilling and everyday use without the repaint cycle.

What holds a Trex deck up?

In most cases, wood. The City of Naperville deck guide requires the structural members of a deck (joists, beams, posts and ledger boards) to be pressure-treated wood unless another material is approved in advance. Composite boards and railings sit on top of that frame. So a composite deck is only as long-lasting as the framing, footings and ledger underneath it, which is why the structure gets the same attention as the boards.

The Trex deck in Glendale Heights was built on a new pressure-treated frame, with Trex decking, white composite rails with black balusters, new stairs and built-in benches, under a permit with its inspections completed. The elevated Trex deck in Streamwood is the same idea higher off the ground: a 20 by 10 ft deck with pressure-treated framing, black Trex railings, matching fascia and a full staircase.

Which colors and railings can you choose?

Homeowners pick from a range of decking colors, railing styles, fascia, stairs and finishing details to match the house. A common look is brown or gray boards with white rails and black balusters; another is a dark railing that keeps the view open. Composite vs. aluminum deck railings compares the two railing families side by side.

Should you resurface with Trex or rebuild the whole deck?

If the existing framing is in good condition, resurfacing with composite boards may be an option: the frame stays, and new decking and railings go on top. If the structure is old or damaged, a full rebuild is usually the better long-term answer, because composite boards will outlast a tired frame. The Bloomingdale deck replacement went that way, with the old deck demolished and new framing built before the Trex decking and railings went on. Deck repair or deck replacement covers the signs that tell the two apart.

Questions we hear

Does Trex decking fade?

Composite boards are made to resist fading, and every color weathers a little in full sun. What the manufacturer covers differs by product line, so read the warranty for the line you are considering before you pick a color.

Can I pressure wash my Trex deck?

On Transcend, Enhance and Select, Trex allows it with a fan tip at no more than 3100 psi. Higher pressure can damage the surface.

Is Trex the only composite option?

No. TimberTech and Fiberon are the other two brands Osnova builds with, and each has its own colors and price levels.

The composite deck page for Glendale Heights shows the local Trex build.

Planning a composite deck?

Send us a photo of your yard or your current deck, and Osnova will help you compare Trex and the other composite options for your layout. You can also request a free estimate through the contact page.

Sources

  1. Trex, Care Guide: How to Clean Composite Decking
  2. City of Naperville, Residential Deck Resource Guide (materials, R507.2)

Ready to start your project? Get a free estimate.

Get your Free Estimate

Ready to build, replace, or repair your deck? Fill out the form below and we will contact you.

Reply STOP to opt out or HELP for help. Message frequency varies. Message and data rates may apply. See our Privacy Policy and Terms.

This form is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.